User`s manual

4M30 Camera User’s Manual 12
DALSA 03-32-10030-03
2.5 Data Output
Figure 3 illustrates the data channel outputs when viewed from the front of the CCD.
Arrows indicate channel read out direction.
Figure 3: Channel read out direction




The camera back panel output connectors DATA1, DATA 2, DATA 3, and DATA 4 utilize
differential LVDS signals with pin assignments described in Table 6.
Connector and Pinout
Table 6: DATA Connector Pinout
Pin Symbol Pin Symbol Pin Symbol Pin Symbol
1 D*0+ 16 Reserved 31 NC 46 GND
2 D*0- 17D*7+ 32NC 47NC
3 D*1+ 18 D*7- 33 NC 48 NC
4 D*1- 19D*8+ 34NC 49NC
5 D*2+ 20 D*8- 35 NC 50 NC
6 D*2- 21D*9+ 36NC 51NC
7 D*3+ 22 D*9- 37 NC 52 NC
8 D*3- 23 D*10+ 38 NC 53 Reserved
9 D*4+ 24 D*10- 39 NC 54 Reserved
10 D*4- 25 D*11+ 40 NC 55 VSYNC-
11 D*5+ 26 D*11- 41 NC 56 VSYNC+
12 D*5- 27 NC 42 NC 57 HSYNC-
13 D*6+ 28 NC 43 NC 58 HSYNC+
14 D*6- 29 NC 44 NC 59 PIXCLK-
15 Reserved 30 NC 45 GND 60 PIXCLK+
15
1
16
30
45
31
46
60
(Molex Part #
70928-2000
or equivalent)
NC = No Connect. These pins are unused.