Specifications

VA6x User’s Reference405-00022-00
25Rev 00; 16 October 2007
I/O Connector
The Industrial I/O is available through the female 25-pin D-Sub connector.
Pin 1
Figure 15. I/O Connector
I/O Connector Definitions
Pin # Direction Definition in iNspect and iLabel
1 – Ground
2 In GPI0 Trigger 1 input
3 In GPI2 Solution ID 1
4 In GPI4 Trigger 2 input or Solution ID 5
5 In GPI6 Solution ID 3
6 – Ground
7 Out GPO0 Strobe 1 output
8 Out GPO2 Decision Output 1
9 Out GPO4 Strobe 2 output
10 Out GPO6
11 In Not connected on standard NPN. User Power input on PNP option.
12 Out Fused +12V at 0.75A
13 & 14 – Ground
15 In GPI1 Change Solution Input
16 In GPI3 Solution ID 0
17 In GPI5 Solution ID 2
18 In GPI7 Solution ID 4
19 – Ground
20 Out GPO1 Decision Output 0
21 Out GOP3 Inspection Running Status
22 Out GPO5
23 Out GPO7
24 Out Fused +5 V at .75 A
25 – Ground
The application software (iNspect and iLabel) overrides I/O settings in the Camera Configuration
File, defining the trigger inputs, strobe output, and decision outputs.