User`s manual

Falcon 4M Camera Manual
DALSA 03-032-20044-01
47
Calibrating Individual Pixels
Purpose: Sets an individual pixel’s FPN coefficient.
Syntax
sfc x y i
Syntax Elements:
x
The pixel column number from 1 to 2352.
y
The pixel row number from 1 to 1728.
i
Coefficient value in a range from 0 to 1023.
Notes:
 The sfc command is not available when the camera is using
the factory calibrated coefficients (csn 0-7). You must select
the user coefficient set (csn 8-15) before you can perform
FPN calibration. An error message is returned if you attempt to
perform FPN calibration when using csn 0-7.
Example:
sfc 10 50