User`s manual

Falcon 4M Camera Manual
DALSA 03-032-20044-01
39
The following graph illustrates the relationship of maximum frame rate versus sequence
size.
Figure 14: Maximum Frame Rate versus Sequence Size (efd 1, snd 1)
Max Frame Rate vs Vertical Window Size
10.0
100.0
1000.0
10000.0
0 250 500 750 1000 1250 1500 1750 2000
Vertical Window Size (# lines)
Max Frame Rate (fps)
clm 16, sot 320
clm 3, sot 160
Window Start End Command
Purpose: Sets a window of interest.
Syntax:
wse q i x1 y1 x2 y2
Syntax Elements:
q
Window sequence id to use. In this camera, the sequence id is
always
0.
i
Window to set. You can only set one window, so this is always
1.
x1
Window start corner value. Since there is only a vertical (and not
horizontal) window of interest in this camera, this value is
always set to
1.
y1
Window start pixel number in a range from 1-1725 and must
belong to the following set: 1, 5, 9, …1725.
x2
Window end corner value. Since there is only vertical (and not
horizontal) window of interest in this camera, this value is