User`s manual

Falcon 4M Camera Manual
DALSA 03-032-20044-01
25
4M60 Data Readout Configurations
Camera Link Mode Configuration (Controlled by clm
command)
Pixel Rate
Configuration
(Controlled by
sot command)
Command Camera Link
Configuration
Camera Link Taps Bit
Depth
clm 2
Base 2 Camera Link taps
where:
1 = Taps 1+3
2 = Taps 2+4
8
sot 130 = 65
MHz strobe
sot 160 = 80
MHz strobe
clm 3
Base 2 Camera Link taps
where:
1 = Taps 1+3
2 = Taps 2+4
10 sot 130 = 65
MHz strobe
sot 160 = 80
MHz strobe
clm 15
Medium 4 Camera Link taps
where:
1 = Tap 1
2 = Tap 2
3 = Tap 3
4 = Tap 4
8
sot 260 = 65
MHz strobe
sot
320 = 80 MHz
strobe
clm 16
Medium 4 Camera Link taps
where:
1 = Tap 1
2 = Tap 2
3 = Tap 3
4 = Tap 4
10 sot 260 = 65
MHz strobe
sot 320 = 80
MHz strobe
3.3.2 Setting the Camera Link Mode
Purpose: Sets the camera’s Camera Link configuration, number of Camera
Link taps and data bit depth. Refer to the tables above for a
description of each Camera Link mode.
Syntax:
clm m
Syntax Elements:
m
Output mode to use:
2: Base configuration, 2 taps, 8 bit output
3: Base configuration, 2 taps, 10 bit output
15: Medium configuration, 4 taps, 8 bit output (4M60 only)
16: Medium configuration, 4 taps, 10 bit output (4M60 only)
Notes:
• To retrieve the current Camera Link mode, use the
command
gcp
• For details on line times and frame readout times when
using a window of interest, refer to following table.
Example:
clm 3