User`s manual

PRELIMINARY 4M Stop Action Camera Manual
8
3. Output over 10-90%
h the part num4. Althoug ber indicates that the maximum frame rate is 60fps, the actual
5. Optical distance.
er
1.3 Camera Blemish Specifications
le pecifications
maximum frame rate is 62fps.
6. +12V consumes the least amount of pow
Table 2: Camera B mish S
Pixel defects TBD
Cluster defects TBD
Column defects 0
Row defects 0
Definition of blemishes
Pixel defect
50% of the linear range), deviates
more than ±30% from its neighboring pixels.
ixel whose signal, in dark, deviates more than 300 DN from its neighboring pixels.
• A grouping of at most 5 pixel defects within a sub-area of 3x3 pixels.
• Column defects must be horizontally separated by 3 good columns.
Row defect
• A horizontal grouping of more than 8 pixel defects between at least 2 good pixels on
both sides, where single good pixels between 2 defective pixels are considered as
defective.
• Pixel whose signal, at nominal light (illumination at
• P
Cluster defect
Column defect
• A column, which has more than 8 pixel defects in a 1x12 kernel.
03-32-10121-09 DALSA