User`s manual

4M Stop Action Camera Manual PRELIMINARY
7
Connectors
power connector
data connector
6 pin male Hirose
2 x MDR26 female
Input Voltage Volts +12 to +15 6
Power Dissipation , 12 ax W 7 typ m
Operating Temperature °C 0 to 50 1
Data Output Format Bits 8 or 10 user selectable
Output Data Configuration Base or Medium Camera
Link
Minimum Frame R H 1 ate z 1
Maximum Frame Rate Hz 62.1 (4M60)
31 (4M30)
62.1 (4M60)
31 (4M30)
4
Data Rate MHz 80 80
Dynamic Range
(10 bits @ nomi l gain) na
Ratio 670:1 890:1 2
Random Noise DN rms 1.3 1.1
Broadband Responsivity DN/(nJ/cm
2
) 11.6 11.6
DC Offset D 0 37 N 18
Antiblooming >1000x
saturation
>1000x
saturation
FPN DN rms 20 3
PRNU % 2 2
Integral non-linearity DN <2% <2% 3
Test conditions unless otherwise noted:
• ECE = Exposure control enabled. 60fps, 15 millisecond exposure time. Exposure
de 2 or 4
re control disabled. 60fps, Maximum exposure time. Exposure mode 3
or 7.
• Data Rate: 80 MHz
artz Halogen, 3250K, with 500-600 nm bandpass filter
perature 25°C
• Full Frame
• Average output 840DN
• 10 bits
Notes:
1. Measured at the front plate.
2. Based on output at 1023DN
mo
• ECD = Exposu
• Light Source: Broadband Qu
installed
• Ambient test tem
DALSA 03-32-10121-09