User`s manual

4M Stop Action Camera Manual PRELIMINARY
57
Power
Power will not be provided on the Camera Link connector. The camera will receive
power through a separate cable. Camera manufacturers will define their own power
quirements.
Camera Link Video Timing
Figure 22: Pantera SA 4M60 Standard Timing (Input and Output Relationships)
connector, current, and voltage re
IMPORTANT:
This camera uses the
falling
edge of EXSYNC
to trigger line readout,
unlike previous DALSA
cameras, which used the
rising edge.
twPR_LOW tPR_INTtwPR_LOW
thPR
tLF
tLVAL_LOWtLINE tLVAL_LOWtLINEtFL
tREADOUT tOVERH
E
tTRANSFER tREADOUT
tFRAME PERIOD
twSYNC_INTtwSYNC twSYNC_INT
tFRAME PERIOD
twSYNC
1 N
STROBE
EXSY NC
FRAME VA LID
LINE VALID
DA TA
PIXEL RESET
DVAL
twSYNC e EXSYNC
lse. When in SMART EXSYNC
h i ater
tosites to be properly
µs 12
The minimum width of th
pu
mode, the minimum widt
allow for the pho
s gre to
reset.
twSYNC_INT Is the the integration time when the
“SMART EXSYNC” feature is available
and turned on. Note that the imu min m
time is necessary to guarantee proper
operation.
µs 10
t FRAME
PERIOD
The minimum frame time made up of
tTransfer, tREADOUT plus
tOVERHEAD
ms 16.129 1000.0
tTRANSFER The time from the reception of the
falling edge of EXSYNC to the rising
edge of FVAL.
µs 58 (clm 15/16)
82 (clm 2/3)
tREADOUT Is the time that frame valid is high µs 16000 (clm 15/16,
sot 320)
32000 (
clm 2/3)
DALSA 03-32-10121-09