User`s manual

4M Stop Action Camera Manual PRELIMINARY
41
Setting D
Purpose: nd subtract. When
lue from the digital video signal, using the
ssb command, the output can no longer reach its maximum. Use
this command to correc for this where:
igital System Gain
Improves signal output swing after a backgrou
subtracting a digital va
t
ssg value =
max output value
max output value - ssb value
Syntax:
Syntax Elements:
t
1 to 2, or 0 for all
ssg t i
Sensor tap selection. Allowable range is
taps.
i
to 65535. The digital Gain setting. The gain ranges are 0
video values are multiplied by this value where:
Digital Gain=
4096
i
For example, to set a digital gain of 1.0, i equals 4096.
Notes:
• Entering a large value gain will cause the camera to digitally
saturate the output image
• Entering a zero value gain will cause the camera to force the
pixels in the designated tap to be 0 DN
Related Commands:
ssb
Example:
ssg 1 15
DALSA 03-32-10121-09