User`s manual

4M Stop Action Camera Manual PRELIMINARY
33
3.6.1 Selecting Factory or User Coefficients
Purpose: icient set to use. The camera ships with a factory
calibrated set of FPN and PRNU coefficients. The factory coefficients
cannot be erased or modified.
Syntax Element
et of FPN and PRNU coefficients. These
.
oefficients. These
Notes:
 The camera ships with the factory calibrated FPN and PRNU
saved to both set 0 and set 1. When you first boot up
, the camera operates using set 1 (csn 1) enabled.
ample:
3.6.2 Enabling Pixel Coefficients
Purpose: ra ships with the FPN and PRNU coefficients enabled, but
disable FPN and PRNU coefficients whenever
Syntax:
epc i i
Syntax Ele ent
.
PRNU coefficients.
0 = PRNU coefficients disabled
1 = PRNU coefficients enabled
Notes:
 The coefficient set that you are enabling or disabling is
determined by the csn value. Refer to the previous section for
an explanation of the csn command.
Example:
epc 0 1
Selects the coeff
Syntax:
csn i
s:
i
Coefficient set to use.
0 = Factory calibrated s
coefficients cannot be erased or modified
1 = User calibrated set of FPN and PRNU c
coefficients can be deleted or modified.
coefficients
the camera
Ex
csn 0
The came
you can enable and
necessary.
m s:
i
FPN coefficients
0 = FPN coefficients disabled
1 = FPN coefficients enabled
i
DALSA 03-32-10121-09