User`s manual

PRELIMINARY 4M Stop Action Camera Manual
26
Mode 7: Internal Frame Rate, Maximum Exposur
In this mode, the fram
e Time
e rate is set internally with a maximum exposure time with
Figure 14: Programmable Frame Rate with Maximum Exposure Time
exposure control disabled (ECD).
Frame Period
Readout
Exposure Time
Frame Period
Exposure Time
Programmable Period
Readout
Programmable Period
3.4.2 Setting the Frame Rate
Purpose:
Syntax:
Syntax Elements:
62.1 (4M60 full
full frame, 80 MHz
window of interest.
Notes:
ure mode 2 or 7.
ent Camera Link
mode and window size. Refer to section for more information
.5 Setting a Vertical
formation on setting a window
size.
• Changing the frame rate will automatically adjust the
exposure time if necessary. The camera sends a warning when
this occurs.
• Refer to section 3.3.3 Setting the Camera’s Pixel Rate for more
information on how to set the camera’s pixel rate
Related Commands:
sem, set
Example:
ssf 25.0
Sets the camera’s frame rate in Hz.
ssf f
Set the frame rate in Hz in a range from
te) or
1-31 (4M30
pixel rate). Rang
on Camera Link modes. Refer to section 3
Window of Interest for more in
f
1-
frame, 80 MHz pixel ra
e increases when using a
• Camera must be operating in expos
• Allowable range is dependent on the curr
03-32-10121-09 DALSA