User`s manual

4M Stop Action Camera Manual PRELIMINARY
23
3.3.3 ting t
Purpose: Sets the camera’s pixel rate. Refer to Table 8and Table 9 for a
description of how pixel rates relate to the camera’s Camera Link
mode.
Syntax Elements
e 2 or 3:
ughput of 130 MHz
ughput of 160 MHz
:
260: 65 MHz pixel rate with a total throughput of 260 MHz
320: 80 MHz pixel rate with a total throughput of 320 MHz
, use the command gcp or
sot 260
3.4 Setting Exposure Mode, Frame Rate and
You have a choice of operating in one of four exposure modes. To select how you want
the camera’s frame rate to be generated:
1. You must first set the camera’s exposure mode using the sem command.
Set he Camera’s Pixel Rate
Syntax:
clm m
:
m
If using Camera Link mod
130: 65 MHz pixel rate with a total thro
160: 80 MHz pixel rate with a total thro
If using Camera Link 15 or 16 (4M60 only)
Notes:
• To retrieve the current pixel rate
get sot.
Example:
Exposure Time
Overview
2. Next, if operating in exposure mode 2 or 7, use the command ssf to set the frame rate
and, if operating in exposure mode 2, use the
set command to set the exposure time.
DALSA 03-32-10121-09