User`s manual

PRELIMINARY 4M Stop Action Camera Manual
22
Table 9: 4M60 Data Readout Configurations
clm 2
Base 2 Camera Link
where:
1 = Taps 1+3
a +4
sot 130 = 65
MHz strobe
sot 160
= 80
MHz strobe
taps
2 = T ps 2
8
clm 3
Base 2 Camera Link taps
where:
1 = Taps 1+3
2 = T s 2ap +4
10 sot 130 = 65
MHz strobe
sot 160 = 80
MHz strobe
clm 15
Mediu 4 Camera Link taps
where:
2 = Tap 2
3 = Tap 3
4 = Tap 4
8
sot 260 = 65
MHz strobe
sot
320
= 80 MHz
strobe
m
1 = Tap 1
clm 16
Medium 4 Camera Link taps
where:
1 = Tap 1
2 = Tap 2
3 = Tap 3
4 = Tap 4
10 sot 260 = 65
MHz strobe
sot 320 = 80
MHz strobe
3.3.2 Setting the Camera Link Mode
Purpose: k configuration, number of Camera
bles above for a
Syntax:
Syntax Elements
2: Base configuration, 2 taps, 8 bit output
3: Base configuration, 2 taps, 10 bit output
15: Medium configuration, 4 taps, 8 bit output (4M60 only)
16: Medium configuration, 4 taps, 10 bit output (4M60 only)
Notes:
• To retrieve the current Camera Link mode, use the
command
gcp
• For details on line times and frame readout times when
using a window of interest, refer to following table.
Example:
clm 3
Sets the camera’s Camera Lin
Link taps and data bit depth. Refer to the ta
description of each Camera Link mode.
clm m
:
m
Output mode to use:
03-32-10121-09 DALSA