User`s manual

Spyder3 GigE Vision SG-14 Monochrome Cameras User’s Manual 67
Teledyne DALSA 03-032-20123-01
The forward and reverse direction is set by changing ―Rotary Encoder Direction Phase‖.
Check the direction shown in the Direction Control Group to confirm the direction;
Figure 44: Rotary Encoder Direction Phase
In some situations, it is desirable to only respond to one direction, either forward or reverse, yEnable the
Encoder Backlash Control function and the Scan Direction to desired direction.
Figure 45: Encoder Backash Control
If the Backlash Control is disabled, the camera will respond to both directions. This may cause image
artefacts when the direction changes. To avoid this, increase the Rotary Encoder Debounce Factor, as
shown in the following figure.