User`s manual

42 Spyder3 GigE Vision SG-14 Monochrome Cameras User’s Manual
03-032-20123-01 Teledyne DALSA
Image Flip Horizontal
This feature is used to flip horizontally the image sent by
the device. Default value: not flipped.
Pixel Format
Use the Pixel Format feature found in the Image Format Control set to select the format of the pixel to use
during image acquisition as either Mono 8 or Mono 12 bit depth.
GigE Vision Input Controls
Image Format Control
Parameter
Description
Pixel Format
Mono 8
Mono 12
Sensitivity Mode
To set the sensitivity mode use the Sensitivity Mode feature found as part of the Image Format Control
set. When using high sensitivity mode, the cameras responsivity increases. High sensitivity mode permits
much greater scanning speeds in low light. It can also allow for reduced lighting levels. The available
modes are: Low, High, and Tall.
More description and examples of the sensititivy mode can be found in the App endix.
GigE Vision Input Controls
Image Format Control
Parameter
Description
Sensitivity Mode
High
Low
Tall
Sensor Direction Control
Found in the I / O Control > Direction Control set of features. Note: This feature is available when in
high sensitivity mode only.
Note: the Sensor Shift features are not available when the camera is in low or tall pixel sensitivity modes.
GigE Vision Input Controls
Direction Control
Parameter
Description
Sensor Scan Direction
When in high sensitivity mode, selects the forward or
reverse CCD shift direction or external direction control.
This accommodates object direction change on a web and
allows you to mount the camera "upside down"
Sensor Shift External Direction
The current sensor shift direction when the direction is