User`s manual

10 Spyder3 GigE Vision SG-14 Monochrome Cameras User’s Manual
03-032-20123-01 Teledyne DALSA
Test conditions unless otherwise noted:
 12-bit values, Flat Field Correction (FFC) enabled.
 CCD Pixel Rate: 40 MHz per sensor tap
 Line Rate: 5000 Hz
 Nominal Gain setting unless otherwise specified
 Light Source: Broadband Quartz Halogen, 3250k, with 750 nm high -pass filter installed
 Ambient test temperature 25 °C
 Unless specified, all values are referenced at 12 bit
 Exposure mode disabled.
 Unless specified, dual line mode.
Note: PRNU measured at 50% SAT.
Certifications
Table 5: EMC Compliance Standards
Compliance
The CE Mark, FCC Part 15, and Industry Canada ICES-003 Evaluation of the Teledyne DALSA Spyder GigE SG-14
cameras meet the following requirements:
EN 55022 Class A, and EN 61326 Emissions Requirements, EN 55024, and EN 61326 Immunity to Disturbances