User`s manual

38 Spyder3 S3-14 and S3-24 User's Manual

03-032-20117-00 Teledyne DALSA

CCD Readout Shift Register

Sensor 1 and 2 (28µm x 14µm OR 20µm x 10µm)

14/10µm

Pixel Detail

28/20µm

Sensor Shift Direction

When in high sensitivity mode, you can select either forward or reverse CCD shift direction. This

accommodates object d irection change on a w eb and allows you to m ount the cam era ―u psid e d ow n‖.

Figure 21: Object Movement and Camera Direction Example using an Inverting Lens

Note: You can control the CCD shift direction through the serial interface. Use the software command scd

to determine whether the direction control is set via software control or via the Camera Link control

signal on CC3.