User`s manual

28 Spyder3 S3-14 and S3-24 User's Manual
03-032-20117-00 Teledyne DALSA
• t = tap id
• x = pixel column number
• y = pixel row number
Example: to return the current camera settings
gcp <CR>
Camera Help Screen
For quick help, the camera can return all available commands and parameters through the serial interface.
There are two different help screens available. One lists all of the available commands to configure camera
operation. The other help screen lists all of the commands av ailable for retrieving camera parameters
(these are called ―get‖ comm and s).
To view the help screen listing all of the camera configuration commands, use the command h.
To view a help screen listing all of the ―get‖ command s, u se the com mand gh.
The camera configuration command help screen lists all commands available. Parameter ranges displayed
are the extreme ranges available. Depending on the current camera operating conditions, you may not be
able to obtain these values. If this occurs, values are clipp ed and the camera returns a warning message.
Some commands may not be available in your current operating mode. The help screen displays NA in
this case.