User`s manual

Piranha4 4K and 2K Dual Line Monochrome CMOS Camera User's Manual 93
Teledyne DALSA 03-032-20176-02
Full Name
Set Binning Vertical
Mnemonic
SBV
Argument(s)
1. Single pixel
2. Binning of 2 pixels
Description
Set vertical binning
Notes
 Must be in Single line mode (stg 1)
 Must be in Line scan mode (dst 0)
Full Name
Direction
Mnemonic
SCD
Argument(s)
Direction
0. Forward
1. Reverse (not available in single line mode)
2. External – controlled by CC3 signal (not
available in single line mode)
Description
Set sensor scan direction
Notes
Full Name
Set Exposure Selector
Mnemonic
SES
Argument(s)
Mode
0. All
1. Bottom
2. Top
Description
Set exposure selector- when in multi exposure mode (see SME command) the exposure
time for the top and bottom lines can be set independently
Notes
 When not in multiple exposure mode ―All‖ is only selection
Full Name
Exposure Mode
Mnemonic
SEM
Argument(s)
Mode
0. Internal (―Timed‖)
1. External (―PulseWidth‖)
Description
Set exposure time mode
Notes
 In internal mode the exposure time is controlled by the SET command
 In external mode the sensor is exposed while CC1 signal is high
 External mode is only available when the trigger mode is also external (STM 1)
 SEM 1 overrides internally generated independent exposure times
 When CC1 signal falls line is read