User`s manual

88 Piranha4 4K and 2K Dual Line Monochrome CMOS Camera User's Manual
03-032-20176-02 Teledyne DALSA
Full Name
Disable Esc Key
Mnemonic
DEK
Argument(s)
Mode
0. Esc key is enabled
1. Esc key is disabled
Description
Allow the use of the Esc key to be disabled so that upon boot-up the camera will directly enter
the ASCII command mode. With the Esc key disabled the GENCP cannot be accessed.
Notes
To access the GenCP, you have to first issue the DEK 0 command in order to enable the
ESC key. Then reboot the camera.
Full Name
Device Scan Type
Mnemonic
DST
Argument(s)
Mode
0. Line Scan
1. Area Scan
Description
Use this command to switch between Area and Single Line modes.
Notes
 STG must equal 1 to enter the area mode DST = 1
Full Name
Flatfield Mode
Mnemonic
FFM
Argument(s)
Mode
0. Disable use of user FPN and PRNU flat field
correction coefficients
1. Enable use of user FPN and PRNU flat field
correction coefficients
2. Reset user FPN coefficients to zero and user
PRNU coefficients to one
3. Scan direction controlled user set loading
Description
Set flat field mode
Notes
Full Name
Set Flatfield Scan Direction Reverse Set
Mnemonic
FRS
Argument(s)
User Set Number
1 to 8
Description
Set scan direction controlled reverse set
Notes