User`s manual

78 Piranha4 4K and 2K Dual Line Monochrome CMOS Camera User's Manual
03-032-20176-02 Teledyne DALSA
Serial Port Control Category
The Serial Port control in CamExpert allows the user to select an available camera serial port and review
its settings. This section also describes the Genie TS Framework Virtual Serial Port Driver and the use of
the Genie TS serial port as an interface from an Ethernet network to a serial port control system for other
devices.
Features listed in the description table but tagged as Invisible are usually for Teledyne DALSA or third
party software usage—not typically needed by end user applications.
Serial Port Control Feature Descriptions
The Device Version number represents the camera software functional group, not a firmware revision
number.
Display Name
Feature
Description
View
Baud Rate
DeviceSerialPortBaudRate
Sets the baud rate used by the selected
device‘s serial port. Available baud rates are
device-specific.
1.00
Beginner
DFNC
Baud 9600
Baud 19200
Baud 57600
Baud 115200
Baud 230400
Baud 460800
Baud 921600
Baud 9600
Baud 19200
Baud 57600
Baud 115200
Baud 230400
Baud 460800
Baud 921600
Baud rate is 9600
Baud rate is 19200
Baud rate is 57600
Baud rate is 115200
Baud rate is 230400
Baud rate is 460800
Baud rate is 921600