User`s manual

74 Piranha4 4K and 2K Dual Line Monochrome CMOS Camera User's Manual
03-032-20176-02 Teledyne DALSA
In the Flat Field area change the mode to Scan Direction Controlled.
A Note on External Direction, Direction Source, and User Sets
If using external direction control through CC3 ensure that the Direction Source is both set to external
and saved in the user set. Also ensure that the polarity on CC3 is set appropriately for the desired
direction.
Save to a different user
set than the one selected
for reverse direction.
Forward direction user set and default user
set must be the same.
Set the Flat Field mode to
Scan direction Controlled.