User`s manual

64 Piranha4 4K and 2K Dual Line Monochrome CMOS Camera User's Manual
03-032-20176-02 Teledyne DALSA
Flat Field Control Feature Description
The following table describes these parameters along with their view attribute and minimum camera
firmware version required. Additionally the firmware column will indicate which parameter is a
member of the DALSA Features Naming Convention (DFNC), verses the GenICam Standard Features
Naming Convention (SFNC not shown).
The Device Version number represents the camera software functional group, not a firmware revision
number.
Display Name
Feature
Description
Device
Version
& View
Mode
flatfieldCorrectionMode
1.00
Off
Off
FPN and flat field coefficients
disabled.
Beginner
On
On
FPN and flat field coefficients
enabled.
DFNC
Initialize
Initialize
Reset all FPN to 0 and all flat field
coefficients to 1.
ScanDirectionControlled
ScanDirectionControlled
Different user set loaded
depending on direction.