User`s manual

44 Piranha4 4K and 2K Dual Line Monochrome CMOS Camera User's Manual
03-032-20176-02 Teledyne DALSA
rates.
Number of bits per character used in the
serial port
Data Size
8
Parity of the serial port
Parity
None
Number of stop bits per character used
in the serial port
Number of Stop
Bits
1
Pixel Format
Use the Pixel Format feature, found in the Image Format Control set, to select the format of the pixel to
use during image acquisition as either Mono 8, Mono 10, or Mono 12 bit depth.
Image Format Control
Parameter
Description
Pixel Format
Mono 8*
Mono 10
Mono 12
*Only available format for Full and Deca Camera Link
configurations.
Camera Direction Control
Found in the Camera Control > Direction Control set of features. Note: This feature is only available
when in TDI mode.
Note: the Sensor Shift features are not available when the camera is in low or tall pixel sensitivity modes.
Camera Control > Direction Control
Parameter
Description
Scan Direction Source
When in TDI stages 2 or Area mode, this command lets you
select the Internal or external direction control. Use this
feature to accommodate object direction change on a web
and to mount the camera "upside down."
Scan Direction
Read the current direction.