User`s manual

Piranha4 4K and 2K Dual Line Monochrome CMOS Camera User's Manual 25
Teledyne DALSA 03-032-20176-02
Connect to the camera
1. Start a new Sapera CamExpert application (or equivalent Camera Link compliant interface) by
double clicking the desktop icon created during the software installation.
2. In the Devices list area on the left side, select the COM port below the Camera Link label.
Figure 10. CamExpert GUI showing connected camera
Check LED Status
If the camera is operating correctly at this point, the diagnostic LED will shine green.
Software Interface
All the camera features can be controlled through the CamExpert interface. For example, under the
Camera Control menu in the camera window you can control the line rate and exposure times.