User`s manual

Piranha4 2K and 4K Color Camera User's Manual 81
Teledyne DALSA 03-032-20180-02
Digital I/O Control Feature Descriptions
The P4 Digital I/ O control category, as organized by CamExpert, groups together the sensor specific
parameters. This group includes the controls for line rate, exposure time, scan direction, and gain.
Parameters in gray are read -only, either always or due to another parameter being enabled or disabled.
Parameters in black are user set in CamExpert or programmable via an imaging application .
The following table describes the digital I / O control parameters along with their view attributes and the
minimum camera firmware version required. Additionally, the firmware column indicates which
parameter is a member of the DALSA Features Naming Convention (DFNC), verses the GenICam
Standard Features Naming Convention (SFNC not shown). The Device Version number represents the
camera software functional group, not a firmware revision number.
Display Name
Feature
Description
Device Version
& View
Trigger Source
Trigger Source
Defines the source of external trigger (RO)
1.00
DFNC
Beginner
Trigger
Selector
Trigger Selector
Defines what the trigger initiates (RO)
1.00
DFNC
Beginner
Trigger Mode
Trigger Mode
Determines the source of trigger to the
camera, internal or external (CC1)
1.00
DFNC
Beginner