User`s manual

Piranha4 2K and 4K Color Camera User's Manual 51
Teledyne DALSA 03-032-20180-02
Figure 26. CamExpert’s Camera Information Window
Verify Temperature and Voltage
To determine the voltage and temperature at the camera, use the Refresh Voltage and Refresh
Temperature features found in the Camera Information set.
The temperature returned is the internal temperature in degrees Celsius. For proper operation, this value
should not exceed 80 °C. If the camera exceeds the designated temperature it will stop imaging and the
LED will turn red. Once you have diagnosed and remedied the issue u se the reset camera function.
The voltage d isplayed is the camera‘s inp ut voltage.
Note: The voltage measurement feature of the camera provides results typically within 1%. This
measurement can be used to set the applied voltage to the camera.