User`s manual

Piranha4 2K and 4K Color Camera User's Manual 49
Teledyne DALSA 03-032-20180-02
Software trigger button:
With the I/ O control parameters set to Trigger Enabled / Software
Trigger type, click to send a single software trigger command.
CamExpert display controls:
(these do not modify the frame buffer data)
Stretch image to fit, set image display to original size, or zoom the
image to virtually any size and ratio.
Histogram / Profile tool:
Select to view a histogram or line/ column profile during live
acquisition or in a still image.
 Output Message pane: Displays messages from CamExpert or the device driver.
Review a Test Image
The camera is now ready to retrieve a test pattern. Select Image Format Control > Test Pattern and
choose one of the following available test images.
0. Off: Sensor Video
1. Grey Ramp
2. Ramp
Pixels: {1, 2, 3…}
Red Value: {0, 1, 2…}
Green Value: {102, 103, 104…}
Blue Value: {204, 205, 206…}
Values roll over at 255.
At this point you are ready to start operating the camera in order to acquire images, set camera functions,
and save settings.