User`s manual

Piranha4 2K and 4K Color Camera User's Manual 33
Teledyne DALSA 03-032-20180-02
This timing can be used for applications that require line rates up to 40 kHz and therefore must use
Camera Link Medium mode and two cables.
The RGB output format is compatible with the Camera Link specification for Medium RGB. Line rates up
to 70 kHz can be achieved by using the Area of Interest (AOI) feature; where the smaller the AOI, the
greater the potential line rate.
RGB plus monochrome 8 bit CL medium, maximum line rate 62K (2K only), no AOI and 85 MHz
CL clock
Red 1
D0..D7
Blue 1
D0..D7
Green 1
D0..D7
Red 3
D0..D7
Blue 3
D0..D7
Green 3
D0..D7
Red 2045
D0..D7
Blue 2045
D0..D7
Green 2045
D0..D7
Red 2047
D0..D7
Blue 2047
D0..D7
Green 2047
D0..D7
CL Port A
CL Port B
CL Port C
CL Clock
Line Valid
Red 2
D0..D7
Blue 2
D0..D7
Green 2
D0..D7
Red 4
D0..D7
Blue 4
D0..D7
Green 4
D0..D7
Red 2046
D0..D7
Blue 2046
D0..D7
Green 2046
D0..D7
Red 2048
D0..D7
Blue 2048
D0..D7
Green 2048
D0..D7
CL Port D
CL Port E
CL Port F
Mono/IR 1
D0..D7
Mono/IR 2
D0..D7
Mono/IR 3
D0..D7
Mono/IR 4
D0..D7
Mono/IR 5
D0..D7
Mono/IR 6
D0..D7
Mono/IR 7
D0..D7
Mono/IR 8
D0..D7
Mono/IR 9
D0..D7
Mono/IR 10
D0..D7
Mono/IR 11
D0..D7
Mono/IR 12
D0..D7
Mono/IR
2037
D0..D7
Mono/IR
2038
D0..D7
Mono/IR
2039
D0..D7
Mono/IR
2040
D0..D7
Mono/IR
2041
D0..D7
Mono/IR
2042
D0..D7
Mono/IR
2043
D0..D7
Mono/IR
2044
D0..D7
Mono/IR
2045
D0..D7
Mono/IR
2046
D0..D7
Mono/IR
2047
D0..D7
Mono/IR
2048
D0..D7
This timing can be used for applications that require line rates up to 60 kHz and therefore must use
Camera Link Medium mode and two cables.
The RGB output format is not defined in the Camera Link specification Deca. The RGB format is such that
when using a Camera Link frame grabber compatible with the Deca format configured for the mono
standard, the R, G and then B pixels will be written sequentially into the frame grabber buffer. This
process simplifies the extraction of the RGB data from the frame grabber buffer by the host application.
Line rates up to 70 kHz can be achieved by using the Area of Interest (AOI) feature; where the smaller the
AOI, the greater the potential line rate.