User`s manual

Piranha4 2K and 4K Color Camera User's Manual 109
Teledyne DALSA 03-032-20180-02
Full Name
Load Pixel Coefficients
Mnemonic
LPC
Argument(s)
Set selector
0. Factory set
1-8. User sets
Description
Load user set
Notes
 Loads FPN coefficients and PRNU coefficients from a user set ( only
coefficeints, no other camera parameters)
Full Name
Reset Camera
Mnemonic
RC
Argument(s)
Description
Resets the camera to the saved user default settings. These settings are saved using the
usd command.
Notes
Full Name
Set Binning Horizontal
Mnemonic
SBH
Argument(s)
Binning
1. Single pixel
2. Binning of 2 pixels
Description
Set horizontal binning
Notes
Full Name
Set Flatfield ROI
Mnemonic
ROI
Argument(s)
First pixel
1 to 4096 (2048, 2k)
Last pixel
1 to 4096 (2048, 2k)
Description
Flat field region of interest
Notes
 Specifies the pixels that CCF and CPA will calibrate
o Pixel coefficients outside this region are not changed
 Last pixel must be greater than or equal to first pixel
Full Name
Reset Flatfield Coefficients
Mnemonic
RPC
Argument(s)
Description
Reset all user FPN values to zero and all user PRNU coefficients to one
Notes