User`s manual

10 Piranha4 2K and 4K Camera Color User's Manual
03-032-20180-02 Teledyne DALSA
Certifications
Compliance
EN 55011, FCC Part 15, CISPR 11, and ICES-003 Class A Radiated Emissions Requirements*
EN 55024, and EN 61326-1 Immunity to Disturbance*
RoHS per EU Directive 2002/ 95/ EC and WEEE per EU Directive 2002/ 96/ EC and China Electronic Industry
Standard SJ/ T11364-2006*
GenICam XML Description File, Superset of the GenICam™ Stand ard Featu res N am ing Convention specification
V1.5, Camera Link Serial Com munication: GenICam ™ Generic Control Protocol (GenCP V1.0)
* Pending test results.
Supported Industry Standards
GenICam™
Piranha4 cameras are GenICam compliant. They implem ent a superset of the GenICam ™ Standard
Features Naming Convention specification V1.5. This description takes the form of an XML device
descrip tion file resp ecting the syntax d efined by the GenAp i m od ule of the GenICam™ specification. The
camera uses the GenICam ™ Generic Control Protocol (GenCP V1.0) to communicate over the Camera
Link serial port. For more information see www.genicam.org.
Sensor Responsivity and Design
Responsivity
The responsivity graph illustrates the sensor‘s response to different wavelengths of light (excluding lens
and light source characteristics).
Note: The responsivity of a color camera will measure approximately 1/ 6
th
that of a similar monochrome
camera model as a result of the effect the color filter has on the sensor and also due to the color camera
not incorporating TDI Mode.