User`s manual

Piranha HS 4x User’s Manual 53
DALSA Corp. PRELIMINARY 03-32-10040-03
Appendix B
Command Reference
When entering commands, remember that:
• A carriage return (CR) ends each command. The linefeed character is ignored.
• Values in square brackets are optional.
• The camera will answer each command with either a carriage return <CR> and line
feed <LF> followed by "OK >" or "Error x: Error Message >". The ">" is always the last
character sent by the camera.
• The following parameter conventions are used:
t = tap id
i = integer value
f = real number
x1 = pixel start number
x2 = pixel end number
[ ] = optional parameter
Serial Protocol Defaults:
• 8 data bits
• 1 stop bit
• No parity
• No flow control
• 9.6Kbps
• Camera does not echo characters