User`s manual

50 Piranha HS 4x User’s Manual
03-32-10040-03 PRELIMINARY DALSA Corp.
Item (when programmable configuration the
options are separated with a | )
Piranha HS 4x
Camera Standard <NTSC, PAL, VS, VW, MW> VS
Number of Camera Configurations<1,2,3,…> 4
Configuration Definition
Cx= HDW, Number of Output Taps, Bit Width,
Number of Processing Nodes where
Cx is the configuration ID x is <1,2,3…>
HDW is <Base, Medium, Full>
Number of Output Taps is <1,2,3…>
Bit width is <8, 10,12…>
Number Processing Nodes is <1 or 2>
C1 = Base 4, 8,1
C2 = Base, 4 , 10, 1
C3 = Medium, 4, 8, 1
C4 = Medium, 4 , 10, 1
See section
3.5 Setting the Data Mode for
details on changing the camera
configuration.
Tap Reconstruction
In some configurations the reconstruction may
change. C0 is the default output format and must be
listed. Output configurations that don’t conform are
listed separately.
<Cx,Tn (Column Start, Column End, Column
Increment, Row Start, Row End, Row Increment>
C0, T1 (512, 1, -1, 1, 1, 1)
C0, T2 (1024, 513, -1, 1, 1, 1)
C0, T3 (2047, 1536, -1, 1, 1, 1)
C0, T4 (2048, 1537, -1, 1, 1, 1)
Camera Color
<Hybrid, Mono, Pattern, Solid>
Mono
RGB Pattern Size
<(T1,Columns*Rows)(T2,
Columns*Rows)(T3,Columns*Rows….>
(T1, 1*1) (T2, 1*1 ) (T3, 1*1) (T4, 1*1)
Color Definition
(Column, Row, Color)
Where color is R,G,B
T1=(1,1,M)
T2=(1,1,M)
T3=(1,1,M)
T4=(1,1,M)
Row Color Offset <0,1,2,3…> 0
Column Color Offset <0,1,2,3…> 0
Row Binning Factor <1,2,3 or 1|2|3> 1|2
Column Binning Factor <1,2,3 or 1|2|3> 1|2
Pretrigger Pixels <0,1,2…or 0..15> 0
Pretrigger Lines <0,1,2.. or 0..15> 0
Line Time Minimum <xx ms> 1
Line Time Maximum <xx µs> 19.2
Internal Line/Frame Time Resolution
<xx ns> 0 if not applicable
33.3
Pixel Reset Pulse Minimum Width
<xx ns> 0 if not applicable
N/A
Internal Pixel Reset Time Resolution
<xx ns> 0 if not applicable
N/A
Pixel Reset to Exsync Hold time <xx ns> N/A
BAUD Rate <9600….> 9600, 19200, 57600, 115200
CC1 <Exsync> Exsync
CC2 <Spare> Spare
CC3 <Forward, Spare> Spare