User`s manual

34 Piranha HS 4x User’s Manual
03-32-10040-03 PRELIMINARY DALSA Corp.
3.11.3 Loading, Resetting, Enabling, and Disabling
Pixel Coefficients
After pixel coefficients have been saved to non-volatile memory using the wpc command,
you can reload them. This is useful when you have made unwanted changes to pixel
coefficients.
To load the FPN and PRNU coefficients, use the command:
Syntax:
lpc
You can also reset all pixel coefficients to zero.
To reset pixel coefficients to zero, use the command:
Syntax:
rpc
You can also disable or enable PRNU and/or FPN pixel coefficients.
To enable or disable PRNU and/or FPN coefficients, use the command:
Syntax:
epc i i
Syntax Elements:
i
FPN coefficients.
0 = FPN coefficients disabled
1 = FPN coefficients enabled
i
PRNU coefficients.
0 = PRNU coefficients disabled
1 = PRNU coefficients enabled
Example:
epc 1 0