User`s manual

Piranha HS 4x User’s Manual 15
DALSA Corp. PRELIMINARY 03-32-10040-03
2.6 LED Status Indicators
The camera is equipped with a red/green LED used to display the operational status of
the camera. The following table summarizes the operating states of the camera and the
corresponding LED states.
Table 5: LED Status Indicators
LED state Priority Camera
Status
Condition
Blinking RED 1 Error Fatal hardware failure
Steady RED 2 Warning Monitoring task failure
Blinking GREEN 3 Progress Lengthy operation in progress
Steady GREEN 4 OK Healthy
Note:
When more than one condition is active, the LED indicates the condition with
highest priority. Error and warning states are accompanied by corresponding messages
further describing current camera status. See section B2 Error Handling on page 58 for
error message descriptions.