User`s manual

12 Piranha HS 4x User’s Manual
03-32-10040-03 PRELIMINARY DALSA Corp.
2.2 Input/Output Connectors
Figure 3: Piranha HS 4x Input/Output Connectors
+12V to +15V and Ground
Camera Link™
Camera Link™
Diagnostic LED
2.3 Connectors, Pinouts, and Cables
The Piranha HS 4x cameras use:
• Two high-density 26-pin MDR26 connectors for Camera Link control signals, data
signals, and serial communications. See Figure 4: MDR26 Connector below.
• A Hirose 6 pin power connector. See Figure 5: Hirose 6-pin Circular Male Power
Connector on page 13.
Figure 4: MDR26 Connector (Camera Link Connector)
MDR26 Female
1
14
13
26
Mating Part : 3M 334-31 series
Cable: 3M 14X26-SZLB-XXX-0LC **
Table 3: MDR26 Connector Reference (Camera Link Standard Pinout)
Camera Link Cable
Medium Configuration Base Configuration
Up to an additional 2 Channel Link Chips One Channel Link Chip + Camera
Control + Serial Communication
Camera
Connector
Right
AngleFrame
Grabber
Channel
Link Signal
Cable
Name
Camera
Connector
Right Angle
Frame
Grabber
Channel
Link Signal
1 1 inner shield Inner Shield 1 1 inner shield
14 14 inner shield Inner Shield 14 14 inner shield
2 25 Y0- PAIR1- 2 25 X0-
15 12 Y0+ PAIR1+ 15 12 X0+
3 24 Y1- PAIR2- 3 24 X1-
16 11 Y1+ PAIR2+ 16 11 X1+