User`s manual
Piranha HN RoHS User Manual
Teledyne DALSA 03-032-20135-01
7
Mechanical Interface
Model
HN-80-08k40
Camera Size
80 (l) x 150 (h) x 65 (w)
Mass
650 g
Connectors
6 pin male Hirose, power
MDR26 female, data
Electrical Interface
Model
HN-80-08k40
Input Voltage
+ 12 to + 15 ± 5 % Volts DC
Power Dissipation
2
18.5 W
Operating Temperature
3
0 to 50 °C
Bit Width
8 or 12 bit user selectable bits
Output Data Configuration
Base, Medium or Full Camera Link
Operating Ranges
Model
HN-80-08k40
Maximum Line Rate
34 kHz
Data Rate
Selectable 80, 160, 320 or 640 Mpix / sec
Gain
0 to +20 dB
Calibration Time
4.3 seconds
Performance
Gain 0 dB
Gain +20 dB
Min
Typ
Ma
x
Min
Typ
Max
Dynamic Range
1000
1333
Random Noise
DN
8bit
rms
0.18
0.25
1.8
2.5
SEE pJ / cm
2
200
NEE pJ / cm
2
0.15
0.2
Analog Broadband Responsivity
(DN
8bit
/ nJ / cm
2
)
1240
FPN DN p-p
0.13
1
0.93
PRNU DN
8bit
p-p
1.33
3
12.9
Saturation Output Amplitude
DN
8bit
255 typ
DC Offset
DN
8bit
3 min
5 typ
6 max
Test conditions for all models, unless otherwise noted:
TDI mode of operation. These specifications are not guaranteed for area mode of operation.
Line Rate: 10 kHz.
Nominal Gain setting.
Light Source: Broadband Quartz Halogen, 3250 k, with 700 nm IR cut-off filter installed.
All Max specifications are valid over a 0-50 °C temperature range.
All Typ specifications are measured at 25 °C.