User`s manual

Piranha HN RoHS User Manual
03-032-20135-01 Teledyne DALSA
34
Camera Output Format
How to Configure Camera Output
The cameras offer great flexibility when configuring your camera output. Using the clm command, you
determine the camera‘s Camera Link configuration, num ber of ou tput tap s, and bit d epth. Usin g the sot
com mand, you d etermine the camera‘s outpu t rate. These two commands work together to determine
your final camera output configuration.
You can further configure your readout using the smm com m and to select the camera‘s p ixel read ou t
direction.
The following tables summarize the possible camera configurations. Refer to the figure below for a
description on how to select your camera output.
Figure 14: How to Read the Camera Link Tables
Note: In the following tables the Camera Link taps refer to the way the data is configured for output over
Camera Link.1.3 Image Sensor