User`s manual

Piranha HN RoHS User Manual
Teledyne DALSA 03-032-20135-01
29
Setting Vertical Digital Binning
Syntax:
Increases the vertical pixel pitch and light sensitivity by decreasing vertical resolution.
Vertical binning in TDI Mode should only be used if your w eb‘s shaft encod er provid es a
reduced ratio of pulses to match web speed.
Syntax:
sdv i
Syntax Elements:
i
Vertical digital binning value.
Available values are 1 (factory setting, no binning), 2, or 4.
Notes:
 For optimal flat field correction, you should rerun the ccf and cpa commands
after changing binning values.
 Increasing the vertical binning decreases the maximum allowable line rate. For
internal exposure mode, sem 7, the frame is clipped to the maximum allowable
and the camera sends a warning. For external exposure mode, sem 3, a new
camera frame rate may be required to avoid ignored syncs.
 Command sbv set to default (1).
 Not available in area mode.
Example:
sdv 2