User`s manual

100 • Part II: Sapera LT PC2-CamLink User's Manual
Legacy files using the “.CVI” extension (CORECO VIDEO files) contain all operating parameters
related to the frame grabber board, i.e., what the frame grabber can actually do with camera controls or
incoming video. The Sapera parameter groups located within the file:
• Activates and sets any supported camera control mode or control variable.
• Defines the integration mode and duration.
• Defines the strobe output control.
• Allocates the frame grabber transfer ROI, the host video buffer size and buffer type
(RGB888, RGB101010, MONO8, MONO16).
• Configuration of line/frame trigger parameters such as source (internal via the frame
grabber /external via some outside event), electrical format (TTL, LVDS, OPTO-
coupled), and signal active edge or level characterization.