User`s manual

80 • Operational Reference Genie HM Series-GigE Vision Camera
Feature Type INT32
The feature list for type INT32 has an additional column 'Exponent' which defines the feature's native unit. This
exponent value is used as a unit multiplier so that the feature value is expressed as an integer, not a decimal number.
• As an example from the following table, the Genie frame rate is 60000 with an exponent of 3. Therefore the
frame rate native unit is mHz. The current value shown – 60000 mHz, is actually 60.000 Hz.
Feature Name
(type INT32)
Access Write
mode
Exponent Sample
Value
Boundaries
DeviceMaxThroughput RO Invalid EXP10: 0 18432000
min=0, max=0, inc=0
SensorWidth RO Invalid EXP10: 0 640
1 to sensor width
SensorHeight RO Invalid EXP10: 0 480
1 to sensor height
FrameRate (mHz) RW Always EXP10: 3 60000
100 to camera max
BlackLevel RW Always EXP10: 0 0
min=0, max=1023, inc=1
Gain (in dB) RW Always EXP10: 0 0
min=0, max=12, inc=0.1dB
ExposureTime (μS) RW Always EXP10: 6 16384
min=10 reset mode
min=56 synchronous mode,
max=xxx, inc=1
TriggerDelayToIntegration (μS) RW Always EXP10: 6 0
min=100, max=4000000,
inc=1
FramesPerTrigger RW Always EXP10: 0 1
min=1, max=32767, inc=1
LUTNumberEntries RO Invalid EXP10: 0 256
min=1, max=65536, inc=1
DebounceInput_1 (μS) RW Always EXP10: 6 10
min=1, max=255, inc=1
DebounceInput_2 (μS) RW Always EXP10: 6 10
min=1, max=255, inc=1
PulseDelayOutput_1 (μS) RW Always EXP10: 6 0
min=0, max=16777215,
inc=1
PulseDurationOutput_1 (μS) RW Always EXP10: 6 1000
min=100, max=16777215,
inc=1
PulseDelayOutput_2 (μS) RW Always EXP10: 6 0
min=0, max=16777215,
inc=1
PulseDurationOutput_2 (μS) RW Always EXP10: 6 1000
min=100, max=16777215,
inc=1
Width RW N.conn EXP10: 0 640
min=8, max=sensor width,
inc=4
Height RW N.conn EXP10: 0 480
min=1, max=sensor height,
inc=1
OffsetX RW N.conn EXP10: 0 0
min=0, max=sensorwidth-8,
inc=4
OffsetY RW N.conn EXP10: 0 0
min=0, max=sensorheight-1,
inc=1
SaperaBufferFormat RO Invalid EXP10: 0 16844800
NA
PixelSize RO Invalid EXP10: 0 8
NA
InterPacketDelay (μS) RW N.acq EXP10: 6 0
min=0, max=65535, inc=1
PacketSize RW N.conn EXP10: 0 1500
min=576, max=9152, inc=4
HeartbeatTimeout (mS) RW Always EXP10: 3 500
min=500, max=65000,
inc=1
MaximumPacketResend RW N.conn EXP10: 1 100
min=0, max=1000, inc=1
InterPacketTimeout RW N.conn EXP10: 6 10000
min=1000, max=655350,
inc=1