User`s manual

Genie HM-HC Series-GigE Vision Camera Operational Reference  49
Programmable Reset Mode Exposure Timing
External Trigger Level-controlled Exposure
 Also known as “Pulse Width Control” exposure. See the timing diagram below.
 The external trigger edge initiates the exposure process. The active external trigger edge can be selected as
either the low-high or high-low transition.
 There is a fixed 100μs delay from active trigger edge to start of exposure. Note that the user must also account
for the input opto-coupler electrical specifications (see "External Inputs" on page 109) and any
programmed
input trigger debouncing period.
 Exposure is stopped by the opposite edge on the trigger signal. Therefore the exposure time is defined by the
trigger pulse duration.
 Supports "Reset Mode" on page 52 t
rigger timing only.
External Trigger Level-controlled Exposure Timing