User`s manual

32  Installing the Genie Camera Genie HM-HC Series-GigE Vision Camera
Windows Embedded 7 Installation
Windows Embedded 7 is not officially supported by Teledyne DALSA due to the number of possible
configurations. However, Sapera LT and other Teledyne DALSA products should function properly on the
Windows Embedded 7 platform provided that the required components are installed.
Teledyne DALSA provides answer files (.xml) for use during Windows Embedded 7 installation that install all
necessary components for running Sapera LT 32-bit or 64-bit versions (SDK or Runtime), Sapera Processing 32-bit
or 64-bit versions (SDK or Runtime), Teledyne DALSA framegrabbers or Genie devices.
For each platform (32 or 64-bit), the answer file is provided:
 SaperaGenie.xml: Configuration for Sapera LT, Sapera Processing and Teledyne DALSA Genie devices
These files are located in the following directories:
 <Install Directory>\Sapera\Install\Win7_Embedded\Win32
 <Install Directory>\Sapera\Install\Win7_Embedded\Win64
The OS footprint for these configurations is less than 1 GB. Alternatively, the Windows Thin Client configuration
template provided by Microsoft in the Windows Embedded 7 installation also provides the necessary dependencies
for Sapera LT, Teledyne DALSA framegrabbers and Genie devices (with an OS footprint of approximately 1.5
GB).
If you are installing other applications on the Windows Embedded 7 platform, it is recommended that you verify
which components are required, and if necessary, create a corresponding Answer File.
For more information on performing dependency analysis to enable your application on Windows Embedded 7,
refer to the Microsoft Windows Embedded 7 documentation.