User`s manual

Genie HM-HC Series-GigE Vision Camera Genie HM/HC Series Overview  11

Certifications

EN55022, class A, Radio Disturbance Characteristics

EN61000-4-2, Electrostatic discharge immunity test

EN61000-4-3, Radiated, radio-frequency, electromagnetic field immunity test

EN61000-4-4, Electrical fast transient/burst immunity test

EN61000-4-6, Immunity to conducted disturbances, induced by radio-frequency fields

FCC

Part 15, class A

see "EC & FCC Declaration of Conformity" on page 124

RoHS

Compliancy as per European directive 2002/95/EC

(applies to camera part numbers CR-GENx-xxxxx)

Vibration and Shock Certifications

Test (while operating) Standard Description

Sinusoidal vibrations with identification

of critical frequencies

IEC 68-2-6 (1995)

Test Fc

Frequency range: 10 to 2000 Hz

Amplitude: 5 m/s

Sweep rate: 1 octave per minute

Duration: 1 sweep cycle (to and fro)

Random vibrations MIL-STD-810E (1989)

method 514.4

Category 10

Levels and frequencies:

0.04 g

/Hz from 20 to 1000 Hz

-6 dB/oct. from 1000 to 2000 Hz

Duration: 1 hour

Shocks IEC 68-2-27 (1987)

Test Ea and guide

Shape: half-sine

Amplitude: 75 g

Duration: 3 ms

Number: 3 shocks (+) and 3 shocks (-)

Supported Industry Standards

Genie cameras are 100% compliant with the GigE Vision 1.0 specification

which defines the communication interface protocol used by any GigE

Vision device. The device description and capabilities are contained in an

XML file. For more information see:

http://www.machinevisiononline.org/public/articles/index.cfm?cat=167

Genie cameras implement a superset of the GenICam™ specification which

defines device capabilities. This description takes the form of an XML

device description file respecting the syntax defined by the GenApi module

of the GenICam™ specification. For more information see