User`s manual
Table Of Contents
- Introduction to the Falcon XDR and HG Cameras
- Camera Hardware Interface
- Serial Interface: How to Control the Camera
- Serial Protocol Defaults
- Command Format
- 3.1 Setting Baud Rate
- 3.2 Camera Serial Command Help Screen
- 3.3 Retrieving Information About the Camera
- 3.4 First Power Up Camera Settings
- 3.5 Saving and Restoring Settings
- 3.6 Camera Output Format
- 3.7 Setting Exposure Mode, Frame Rate and Exposure Time
- 3.8 Setting a Vertical Window of Interest
- 3.9 Flat Field Correction
- 3.10 Gain Adjustments
- 3.11 Generating a Test Pattern
- Optical and Mechanical Considerations
- Troubleshooting
- Appendix A: Camera Link™ Reference, Timing, and Configuration Table
- Appendix B: Error Handling and Command List
- Appendix C: EMC Declaration
- Technical Support
- Index
DALSA Falcon XDR and HG Series Camera User's Manual
94 Index
help, 31
hot mirror, 68
I
illumination, 68
incorrect line rate, 73
input/output, 20
inputs (user bus), 23
installation, 19
interface
electrical, 10
mechanical, 10, 14, 16, 17, 66
optical, 10, 68
L
LED, 21
lens
modeling, 68
mounts, 67
light sources, 68
line dropout, 73
LVAL, 76
LVDS, 75
pairs, 77
M
magnification, 69
mechanical
interface, 66
specifications, 10, 14, 16, 17
N
noisy output, 73
O
online help, 31
operating
modes, 36
ranges, 11
optical interface, 68
optical specifications, 10
P
pixel rate, 34
pixel readout, 26
PoCL, 24
power
connector, 25
PRNU, 48
PRNU calibration, 56
R
random noise, 11
readout, 27
configuring, 34
responsivity, 11
S
sensor
diagram, 26
readout, 27
specifications, 10
serial communication
reference, 75
serial interface, 29
defaults, 29
settings
factory, 33
specifications
electrical, 10
mechanical, 10, 14, 16, 17
operating, 11
optical, 10
sensor, 10
subtracting background, 61
T
test pattern, 63
test pattern generator, 63
timing
standard, 77
troubleshooting, 71
line rates, 73