User`s manual
Table Of Contents
- Introduction to the Falcon XDR and HG Cameras
- Camera Hardware Interface
- Serial Interface: How to Control the Camera
- Serial Protocol Defaults
- Command Format
- 3.1 Setting Baud Rate
- 3.2 Camera Serial Command Help Screen
- 3.3 Retrieving Information About the Camera
- 3.4 First Power Up Camera Settings
- 3.5 Saving and Restoring Settings
- 3.6 Camera Output Format
- 3.7 Setting Exposure Mode, Frame Rate and Exposure Time
- 3.8 Setting a Vertical Window of Interest
- 3.9 Flat Field Correction
- 3.10 Gain Adjustments
- 3.11 Generating a Test Pattern
- Optical and Mechanical Considerations
- Troubleshooting
- Appendix A: Camera Link™ Reference, Timing, and Configuration Table
- Appendix B: Error Handling and Command List
- Appendix C: EMC Declaration
- Technical Support
- Index
Appendix C: EMC Declaration 89
Appendix C: EMC Declaration
C.1 EMC Declaration of Conformity
DALSA's FA-2x cameras meet the requirements outlined below which satisfy the EMC requirements for
CE marking, the FCC Part 15 Class B requirements, and the Industry Canada requirements.
Models:
FA-20-01M1H
FA-21-01M1H
FA-21-1M120
FA-21-3HK3H
FA-22-01M1H
FA-23-01M1H
FA-23-1M120
FA-23-3HK3H
The CE Mark Evaluation of the DALSA FA-2x cameras, which are manufactured by DALSA Inc., meets
the following requirements:
EN 55022, EN 55011, CISPR-11, CISPR-22, ICES-003 Class B, and FCC Part 15 Emissions
Requirements.
EN 61326-1 and EN 55024 Immunity to Disturbances.
EN 61000-3-2 Power Frequency Harmonic Current Emissions.
EN 61000-3-3 Flicker Voltage.
Date of issue: February 2010
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a residential environment.
Changes or modifications not expressly approved by DALSA could void the user's authority to operate the
equipment.
Name and Signature of authorized person
Hank Helmond
Quality Manager, DALSA Corp.