User`s manual
Table Of Contents
- Introduction to the Falcon XDR and HG Cameras
- Camera Hardware Interface
- Serial Interface: How to Control the Camera
- Serial Protocol Defaults
- Command Format
- 3.1 Setting Baud Rate
- 3.2 Camera Serial Command Help Screen
- 3.3 Retrieving Information About the Camera
- 3.4 First Power Up Camera Settings
- 3.5 Saving and Restoring Settings
- 3.6 Camera Output Format
- 3.7 Setting Exposure Mode, Frame Rate and Exposure Time
- 3.8 Setting a Vertical Window of Interest
- 3.9 Flat Field Correction
- 3.10 Gain Adjustments
- 3.11 Generating a Test Pattern
- Optical and Mechanical Considerations
- Troubleshooting
- Appendix A: Camera Link™ Reference, Timing, and Configuration Table
- Appendix B: Error Handling and Command List
- Appendix C: EMC Declaration
- Technical Support
- Index
DALSA Falcon XDR and HG Series Camera User's Manual
10 Introduction to the Falcon XDR and HG Cameras
1.2 Camera Performance Specifications
Camera
Model
Resolution Maximum
Frame Rate
Bit Depth Dynamic Range Color or
Monochrome
1.4M XDR 1400Hx1024V
100fps
8 or 10 user selectable
55dB Both
1.4M HG 1400Hx1024V
100fps
8 or 10 user selectable
48dB Both
1M HG 1024Hx1024V
120fps
8
48dB Both
VGA HG 640Hx480V
300fps
8
48dB Both
Optical Interface Units Notes
Back Focal Distance mm 17.52 4
Sensor Alignment
x
y
z
θz
mm
mm
mm
°
+/- 100 microns
+/- 100 microns
+/- 150 microns
+/- 0.2
Lens Mount C-mount
Effective fill factor with
microlenses
% 60
Units Notes
Camera Size mm 44 x 44 x 44
Mass g 105g
Connectors
power connector
data connector
6 pin male Hirose
SDR26 female – mini Camera
Link
Electrical Interface Units Notes