Installation manual

Version 02 teledynedalsa.com/ipd 7
BOA Pro vision systems are shipped with the components listed below. Take a few
moments to verify that everything has arrived in good condition. If your product has
been visibly damaged during shipment or is missing parts, please contact your Teledyne
DALSA representative immediately.
BOA Pro Vision System Components
Component Description
BOA Pro Vision System
BVS-0640M-PRO or,
BVS-1024M-PRO or,
BVS-1280M-PRO
BOA Pro Vision System. Fully integrated vision system with
640x480, 1024x768, or 1280x1024 monochrome sensor,
processing engine, Sherlock Embedded Server embedded
software, communications and light control.
BVS-PRO-CD BOA Pro CD-ROM including the Sherlock Embedded Client
software and associated product manuals and
documentation.
Mounting Screw Kit M4 screws for mounting the sensor (Qty 4)
Component Description
Cables
A-BVS-E8S-X
A-BVS-IO8S-X
A-BVS-L5S-X
M12-RJ45 Ethernet cordset (X; 5=5m, 10=10m)
M12 single-ended IO cordset (X ;5=5m, 10=10m)
M12 single-ended lamp cordset (X; 2=2m, 5=5m)
BVS-PL-100 Panel Link breakout module. Provides Ethernet power and
convenient panel access to BOA I/O
BVS-PL-200 -E, -IO, -EIO Panel Link breakout modules with extended I/O capability.
A-MB-BVS-0 Right Angle mounting block with 8 M4 screws
Lens Various Lens options available from DALSA
A-BVS-LCG-X Lens cover for BOA Vision System. Required for IP67
compliance. (x=35, 40 or 45 mm internal lens length)
A-BVS-LSS-F
A-BVS-M12-P
Set screws for Fujinon Lens
M12 plug for IP67 compliance
Lights Various Lighting options available from Teledyne DALSA
Optional components (sold separately):
Standard components (ship with every BOA Vision System):