Installation manual

Version 02 teledynedalsa.com/ipd 14
iDiscover Utility
Once launched the GUI below will be shown. The left panel shows the MAC addresses
of all reachable and non-reachable BOA cameras. If a camera icon is blue, the address
is compatible. If the camera icon is red, the address is not compatible. Click on one of
these to populate the associated network configuration on the right. You can then
modify the BOA IP address, and click “Apply”.
You cannot use this GUI to connect to BOA Pro cameras running the Sherlock
Embedded software.
In most cases you will need administrator privileges on your PC to access BOA. It may
be necessary to customize the security settings on your browser.
NOTE: See the document “Configuring Windows for BOA” on the BOA Pro CD-ROM.