Specifications

50
9 VOLT BATTERY REPLACEMENT UNITS
9vBRLT
9 volt Battery Replacement For Lionel Trains
Item #598
The 9vBRLT replaces the battery in most engines. The 9vBRLT is intended for use with
Lionel type systems, which have no charging circuit, and all others utilizing their system
such as Atlas, K-Line, Weaver, and others. These systems all require the use of a 9 volt
battery.
The 9vBRLT is similar in size to that of a 9 volt battery so it can fit into most small places.
Since the 9vBRLT does not require any maintenance, you can also install the 9vBRLT
inside the shell of an engine instead of the compartment initially made for the 9 volt
battery.
Installation of the 9vBRLT is simple but does require connecting one wire to the center
roller pickup wire. The battery snap merely connects to the existing 9 volt battery
connector.
Initial charge of the 9vBRLT occurs in the first 30 seconds. After full charge is achieved,
all low voltage operations are performed without the loss of sound for several seconds
(time is determined by how well charged the 9vBRLT is). If the locomotive has been
sitting idle for more than a few hours simply recharge the 9vBRLT.
small size: 1.35" x 0.73" x 1.05"
Super Capacitor
Use Super Capacitors for many different applications.
To replace the 9v battery in an MTH/QSI 9v system, use
Super Capacitors (item #559), one 9v battery snap
connector (item #578 - 2/pk) and a piece of #580 heat
shrink tubing. Connect as per included instructions (final
assembly pictured to the left). After doing so, first charge
the Super Capacitors for 30 seconds before sequencing
the locomotive.
3 volt systems require 1 Super Capacitor from item #559.
Create superb "flicker free" lighting. Use one Super
Capacitor with regulated lighting (items 2379, 2380).
Item #559
2/pk
9vBRTV
9 volt Battery Replacement TV camera power supply
The 9vBRTV is intended to power TV camera
transmitters, or other light current devices, requiring 9
volts DC. This electronic circuit, the 9vBRTV, replaces
the battery in TV type camera transmitters. Install the
9vBRTV by connecting it's input power to either AC, DC,
DCC, or other voltages to obtain the fixed 9 volt output.
To maintain the 9 volt output, sufficient input voltage
must be present. The 9vBRTV contains on board
storage which prevents intermittent connections to the
track power from affecting the cameras operation!
Item #597
typical camera transmitter
used with trains & other
applications.
small size: 1.35" x 0.73" x 1.05"
one super capacitor
from item #559
0.85l x 0.3d x 0.65w
#578